Prevent forced vehicle entry with crash rated vehicle access systems
Ontario Parking Systems is proud to offer a wide range of crash rated vehicle access products. Tested to international standards, our products deliver the most reliable protection.
From familiar barrier arm systems to low profile, parallel-to-road tire killer and wedge barrier systems; we carry a number of products in order to create your perfect security system.
HYSECURITY – STRONGARM M30
StrongArm M30 is a high cycle, M30- P1 crash-tested, fortified barrier arm. This operator runs with the ultra-reliability of HySecurity’s 30-year proven hydraulics, the flexibility, power, and reliability of HySecurity’s programmable Smart Touch® Controller, and unique functional and safety benefits. StrongArm M30 is available to fit 12 to 24-foot clear openings, is rated continuous duty*, and runs at 6 to 8 seconds open/close depending on arm length. EFO is 5 to 7 seconds.
StrongArm M30 │ Gallery
HYSECURITY – STRONGARM M50
StrongArm M50 is a high cycle, M50-P2 crash-tested, fortified barrier arm. This operator runs with the ultra-reliability of HySecurity’s 30-year proven hydraulics, the flexibility, power, and reliability of HySecurity’s programmable Smart Touch® Controller, and unique functional and safety benefits. StrongArm M50 is available to fit 12 to 24-foot clear openings, is rated continuous duty*, and runs at 7 to 10 seconds open/close depending on arm length. EFO is 6 to 8 seconds.
StrongArm M50 │ Gallery
HYSECURITY – HYDRAWEDGE SM50
HydraWedge SM50 defends high-security sites worldwide with proven reliability and unparalleled performance. This high-cycle, shallow-mount vehicle wedge barrier boasts the toughest domestic and international Crash Certifications. HydraWedge SM50 provides high performance and uninterrupted security at a fraction of competitive system installation and maintenance expenses.
HYSECURITY – WEDGESMART DC
WedgeSmart DC is HySecurity’s innovative electromechanical parking and revenue control wedge with a barrier arm operator. It provides continuous duty with UPS battery backup and meets the high cycle, high reliability, and low maintenance demands of the rental car, valet, parking, anti-theft, and revenue control automatic gate operator requirements.
PU30 CRASH BI-FOLD
Our crash-rated bi-fold entraquick gate features fast operation time and obstacle-free passage due to the lack of top and bottom rail guides. Its high reliability and low maintenance make it the ideal solution for high-frequency access routes with high-security requirements. The active arrestor system is designed to effectively prevent the forced entry of vehicles up to the size of a pickup truck (2.5t) travelling at 48km/h.
The City Protector features a shallow foundation depth of only 220mm making it easier to integrate into inner cities where various infrastructure already exists underground. They can also be integrated as street furniture such as benches, planters, bicycle racks, trash cans, and more. Furthermore, the City Protector passed the impact almost unscathed with the complete destruction of the vehicle.
City Protector │ Gallery
BARRIER LIFT SYSTEM
The Barrier Lift System (BLS) provides reliable high-security against unauthorized vehicle access. It is vehicle crash-tested to internationally accepted standards. Its reliable and short operation offers immediate protection against vehicles attempting to break through.
Wedge barriers present maximum security against unauthorized vehicles of all sizes and weights for highly sensitive entry points. They are vehicle crash-tested to internationally accepted standards and feature robust construction with heavy gauge material and high tensile steel. They can be installed as a single unit or in combination with other products (e.g. barriers, gates, tire killers, or bollards). With decreased installation depth and foundation footprint, our wedges reduce installation costs significantly. This allows it to be installed in areas where foundation depths are limited due to underground utilities. Installation is easily implemented due to ready-to-install wedge barrier units and separate drive cabinets. They are traversable in a lowered position per bridge class SLW 60.
Wedge Barrier │ Gallery
The Tire Killer offers a high degree of protection against unauthorized entry or exit of hostile motor vehicles. If a vehicle attempts to break through, its tires and/or axles will be destroyed depending on the model. Tire Killers can be used individually or in combination with other products. The solid sharp spikes are clearly visible thanks to bold warning colours thus ensuring approaching vehicles spot them in good time. The spikes will raise and block the road with a height of 215 – 450 mm, depending on the model. In the lowered position, our Tyre Killers are completely unobtrusive, parallel to the road. They can support wheeled vehicles with a load-bearing capacity up to bridge class SLW 60.
Tire Killer │ Gallery
TYMETAL – TCG-12 CANTILEVER SLIDE GATE
The model TCG-12 Cantilever Slide Gate (U.S. DOS K12) anti-ram slide gate is U.S. Department of State K12 certified (equivalent to ASTM F2656-07 M50). Having a standard height of 8’, the gate uses an open frame structure that allows the user flexibility to match any existing fence design infill such as pickets or chainlinks. Gate clear openings of 12’ to 30’ are available.
TCG-12 │ Gallery
TYMETAL – CANTILEVER SLIDE CRASH GATE TCG4
Tymetal’s TCG-4 Cantilever Slide Gate is ASTM F2656-07 M30 P1 certified (equivalent to U.S. Department of State K4). Having a standard height of 8’ (to the top of the frame), the gate uses an open-frame aluminum structure that allows the user flexibility to match almost any existing fence design infill such as pickets or chainlink. The TCG-4 is designed to operate manually or powered at standard operating speeds of up to two feet per second. This design also eliminates the need for a V track in the roadway while reducing installation time and alignment issues. The use of aluminum as the basis of a crash-tested gate is an industry first and eliminates the concern for rust while reducing maintenance.
TCG4 │ Gallery
TYMETAL – CANTILEVER SLIDE CRASH GATE TCGR12
Tymetal’s model TCGR-12 Cantilever Slide Gate is ASTM F2656-07 M50 P2 Certified (equivalent to U.S. Department of State K12). The TCGR-12’s aluminum frame is easily moved manually or with an operator and uses the same basic design principles of the Tymetal Box Frame Cantilever Slide gates that have been the industry leader for over 30 years. The open-frame design allows the user the flexibility to match almost any existing fence design infill such as pickets, chainlink, or mesh infills.
TCGR12 │ Gallery
TYMETAL – REINFORCED VERTICAL LIFT
Tymetal’s “Reinforcer” Gate systems are easily adaptable to most site conditions. In addition to the gate and operator, the system includes 8 x 8 x ¼” HSS steel tube reinforcement and concrete-filled steel bollards. Available in chain link and ornamental, the Reinforcer will provide an enhanced level of protection to your perimeter’s openings.
Reinforced Vertical Lift │ Gallery